

Latest - Camshafts
by TR20tc
< Brake pedal travel Renewing PI Metering Unit Pedestal Seals Anyone know what this is please?! > | |
---|---|
![]() posts: 112 Kent & East Sussex group joined on Mon 14th Jul 1997 |
posted Wed 16th Dec 2020
Does anybody have instructions and/or a diagram for changing the O rings /seals in the pedestal part of metering unit on a Mark 2 PI please? Oil seems to be leaking from the blanking cap area on the pedestal so i have purchased an O ring / seal kit from the "Brothers" in Lincolnshire! I am ok with sorting the fuel / ignition timing and measuring the gap for the pedestal gasket shims but am wary of parting the metering unit from the pedestal, any (sensible) advice is most welcome! Cheers!
|
Tags - 2000/2500/2.5PI | |
![]() posts: 112 Kent & East Sussex group joined on Mon 14th Jul 1997 |
posted Wed 16th Dec 2020
reply 1 of 3
Ooooops! Have located a script / diagram Fig. 26 (1.513) in the user manual but any advice still much appreciated! Cheers!
|
Tags - 2000/2500/2.5PI | |
![]() posts: 9307 Essex group joined on Sat 17th Sep 2005 |
posted Thu 17th Dec 2020
reply 2 of 3
I think you just undo the 3 bolts and make sure nothing moves. hold the red plastic thing in place with a. Bit of grease if it keeps moving, Schadenfreude expert and collector of assorted rusty Triumphs on the Essex/Suffolk Border. |
Tags - 2000/2500/2.5PI | |
![]() posts: 112 Kent & East Sussex group joined on Mon 14th Jul 1997 |
posted Thu 17th Dec 2020
reply 3 of 3
Quoted from thescrapman- Thanks for the tip Colin!
|
Tags - 2000/2500/2.5PI | |
Club Triumph Ltd. Registered in England No. 4961210 Registered Office: Suite A,10th Floor, Maple House, High Street, Potters Bar, Herts, EN6 5BS. VAT registration number 340 4536 26. Club Triumph is run entirely by its members for its members and does not have paid employees.
Website Terms and Conditions | Terms and Conditions of Sale | Privacy |Club Rules