Club Triumph

... the club for all Triumphs



Please log in to use the full features of this site, or register here
Username: Password: Remember? (in cookie) forgotten password?
Your shopping basket is empty


you are here -
Club Triumph - Cars - 2000/2500/2.5PI
2000/2500/2.5PI

you are here -
Club Triumph forum - Cars - 2000/2500/2.5PI - Advice on seals needed
< Su carbs Advice on seals needed
"asam_x"
posts: 57
non member
 posted Wed 24th Feb 2016

I am in need of good quality/fit on door seals. I know where not to buy from so need to know where to buy from. Thanx
Tags - 2000 2500 2.5PI
"TedTaylor"
posts: 2547

Wye Dean group
joined on Fri 2nd Jul 2010
 		posted Thu 25th Feb 2016 reply 1 of 8

Baines.  I'll see if I can find the details.

Their seals have a rigid flange to go in the locating channel and are a little easier to fit - cannot remember the pattern number.

MUT

Mad Uncle Ted!
Growing old is inevitable - growing up is optional.

AFH849B Mk1 2000 period rally replica (under restoration ..... again) First re-built 1991
NAM616G Morris 1800 London Sydney/Monte/World Cup - in throws of restoration :-)
WDE 76K Mk2 2500 estate (Woodie) RBRR 2014   2016  
LSE Soft Dash Range Rover with Brooklands body kit on LPG (Still for sale)

From the depths of the Forest of Dean....
Tags - 2000 2500 2.5PI
"piman"
posts: 3333
non member
 posted Thu 25th Feb 2016 reply 2 of 8

Hello Ted,

I gave this link to Asam on the Register forum, :- http://www.coh-baines.co.uk/products/SRS-117-%252d-Dual-hardness-EPDM-%7B47%7D-Sponge-door-seal.html

Alec

 Oswestry, Shropshire.

Mk1 1\2 P.I.,Jaguar Mk 2, very long term restoration. Jaguar X Type estate 2.5, Hymer 564 motorhome.
Tags - 2000 2500 2.5PI
"Pete Lewis"
posts: 3342
non member
 posted Thu 25th Feb 2016 reply 3 of 8

http://club.triumph.org.uk/cgi-bin/forum10/Blah.pl/Blah.pl?m-1416975094/s-15/

links to previous topic, I used  CO Baines SRS071  which fits in minutes and so far been excellant for a couple of years

as with any of these seals the C channel must be clear of grot and sealer

you dont need to use any special roller or screwdriver to prod the things in the Tee slided easy round the channels  takes less than 5 minutes per door and certainly dont have to take the door off to fit the other type hard wedge into the channel which i found  was not a option.

Pete

1964 1600 Vitesse 6 Cactus and Black , now  sold
now have T2000   Mk2 saloon in French Blue/grey trim  been  restored without running since 1997
now has power steering ,poly bushed and Alfa 156 seats
location  Luton 

Tssc AO for Herts and Beds Area 
Tags - 2000 2500 2.5PI
"TedTaylor"
posts: 2547

Wye Dean group
joined on Fri 2nd Jul 2010
 		posted Thu 25th Feb 2016 reply 4 of 8

Thanks Alec and Pete - saved me having to break away from sorting out the garages prior to getting on with SCG for the RBRR  

MUT

Mad Uncle Ted!
Growing old is inevitable - growing up is optional.

AFH849B Mk1 2000 period rally replica (under restoration ..... again) First re-built 1991
NAM616G Morris 1800 London Sydney/Monte/World Cup - in throws of restoration :-)
WDE 76K Mk2 2500 estate (Woodie) RBRR 2014   2016  
LSE Soft Dash Range Rover with Brooklands body kit on LPG (Still for sale)

From the depths of the Forest of Dean....
Tags - 2000 2500 2.5PI
"asam_x"
posts: 57
non member
 posted Thu 25th Feb 2016 reply 5 of 8

Thanx for all the replies. I think Baines are the ones. They look good in above pics. Cheers. Asam
Tags - 2000 2500 2.5PI
"Pete Lewis"
posts: 3342
non member
 posted Fri 26th Feb 2016 reply 6 of 8

Good choice,  take care, do a test with some off cuts to get the corner mitre or butt joint on the top of the glass frame  corner how you like it  ,  

I ordered 15mtrs   plenty with some spare

Pete

1964 1600 Vitesse 6 Cactus and Black , now  sold
now have T2000   Mk2 saloon in French Blue/grey trim  been  restored without running since 1997
now has power steering ,poly bushed and Alfa 156 seats
location  Luton 

Tssc AO for Herts and Beds Area 
Tags - 2000 2500 2.5PI
"TedTaylor"
posts: 2547

Wye Dean group
joined on Fri 2nd Jul 2010
 		posted Fri 26th Feb 2016 reply 7 of 8

There are of course two British native types - grey and common ........  (whistle)

MUT

Mad Uncle Ted!
Growing old is inevitable - growing up is optional.

AFH849B Mk1 2000 period rally replica (under restoration ..... again) First re-built 1991
NAM616G Morris 1800 London Sydney/Monte/World Cup - in throws of restoration :-)
WDE 76K Mk2 2500 estate (Woodie) RBRR 2014   2016  
LSE Soft Dash Range Rover with Brooklands body kit on LPG (Still for sale)

From the depths of the Forest of Dean....
Tags - 2000 2500 2.5PI
"Pete Lewis"
posts: 3342
non member
 posted Wed 2nd Mar 2016 reply 8 of 8

Oink Oink    !!

pete

1964 1600 Vitesse 6 Cactus and Black , now  sold
now have T2000   Mk2 saloon in French Blue/grey trim  been  restored without running since 1997
now has power steering ,poly bushed and Alfa 156 seats
location  Luton 

Tssc AO for Herts and Beds Area 
Tags - 2000 2500 2.5PI


users online - sparky_spit, Linespider (17), PetalBot (18), SeznamBot (2), Howard, CCBot, DotBot (2), SurdotlyBot, Dannyb, Facebook, Bingbot (12), Googlebot Images, Googlebot (7), en-GB (7), Ahrefs (17), bl (37), Applebot, Majestic-12 DSearch (5), guest (130)

Switch to mobile view

Club Triumph Ltd. Registered in England No. 4961210 Registered Office: Suite A,10th Floor, Maple House, High Street, Potters Bar, Herts, EN6 5BS. VAT registration number 340 4536 26. Club Triumph is run entirely by its members for its members and does not have paid employees.

Website Terms and Conditions | Terms and Conditions of Sale | Privacy |Club Rules