Vitesse seats (original ones) :: Triumph Torque

Moordale Motors

Welcome, Guest.
Please login or register.
Vitesse seats (original ones)
Forum Login
Login Name: Create a new account
Password:     Forgot password

Triumph Torque    Cars    Herald/Vitesse  ›  Vitesse seats (original ones)
Users Browsing Forum
Yahoo! Bot and 20 Guests

Vitesse seats (original ones) Print
1 Pages 1 Recommend Thread
bxbodger
September 23, 2009, 9:20am Report to Moderator

Posts: 921
Posts Per Day: 0.20
I believe the front seats of a Vitesse are handed, i.e. there's a left and a right one, but how do you tell which is which!!!

Both of mine look the same! They're out at the moment while i paint the car, and I don't know if it's a pair, or two the same and if so which side...............


'68 Mk1 Vitesse convertible boneshaker, and a somewhat more economical '89 998cc A series powered Metro.
Logged
Private Message
Pete Lewis
September 23, 2009, 7:32pm Report to Moderator

Tssc Herts and Beds A.O.
Club Member
Posts: 3,431
Posts Per Day: 0.78
doesnt really matter but the slide release is shown towards the tunnel side
the seat frames are the same part numbers  what is odd is the height /for/aft holes in the seat and slide base need to be offset to get the rear of the frame to drop onto the runners
if you use the what seems obvious holes in alignment the seat will be angled and the tubes miss the runners at the back  if that makes sense    Pete


1964 1600 Vitesse 6 Cactus and Black , now  sold
now have T2000   Mk2 saloon in French Blue/grey trim  been  restored without running since 1997
now has power steering ,poly bushed and Alfa 156 seats
location  Luton
Logged
Private Message Reply: 1 - 6
Jonny-Jimbo
September 23, 2009, 9:54pm Report to Moderator

Club Member
Posts: 4,983
Posts Per Day: 1.22
Would that explain why in my old Herald it felt like you were sitting inside the door card then? If they were on the wrong side of the car they would 'twist'?


62 Vitesse 1600 - Slammed & modified
67 2000 - Fitted with 2.5 o/d - 2012 RBRR, 2015 Essex Rally, 2016 HCR, 2016 RBRR
67 2000 Estate - Dormant
70 Herald 13/60 - First car, many bits
77 CZ 125 Sport - 70 miles on the clock
77 Kawasaki KM90 - Shop hack
81 Yamaha DT125 - Many bits
88 Ginetta G4/4 - Dead
88 BMW E30 320i - For Sale
89 Citroen AX GT - Rally car!
90 BMW E30 318iS - Building to FIA spec
90 Mazda Eunos 1.6 - 'Popeye'
93 BMW 530i - Donor
95 BMW E34 540i - 4L V8
Logged
Private Message Reply: 2 - 6
ferny
September 24, 2009, 4:07pm Report to Moderator

Mr Hoppy!
Club Officer
Club member
Posts: 10,685
Posts Per Day: 2.59
If you get them around the wrong way it'll make it harder to reach the seatbelt in a saloon (I'm told) and it'll rub on the b-post in a convertible (which happened to me). No big deal, just annoying.


Acclaim - fully working and on the road
13/60 Herald - mx5 powered and other such fun things, legal enough...
Mk1 2000 - it's still alive, just sleeping
Expert 815d - the slug

If in doubt, do up until you hear the crack and then go another 1/4 turn to ensure tightness.
Logged
Site Private Message Windows Live Messenger Skype Reply: 3 - 6
Vitesse1965
October 18, 2009, 3:05pm Report to Moderator


Posts: 49
Posts Per Day: 0.01
Just put replacement front seats in and I think I may have fallen foul of the alinment thing, they are catching the sides, Will take another look, thanks for the tip.


Chris, Yeovil, Somerset. Always keen to meet local owners! Now own a Vitesse, was owner of a Herold,
passed my test in a Dolomite (1979)

http://www.swingcats.co.uk/vitesse.htm



Logged
Private Message Reply: 4 - 6
BAPIT123
June 14, 2017, 4:51pm Report to Moderator

Posts: 2
Posts Per Day: 0.01
Hi in response to the question are vitesse seats handed the answer is no, I have had my seats recovered and when i put the drivers seat in the car it was tight on the door pillar and touching the door, after some head scratching and careful looking I realised that the seat runners are handed,( someone had had them out to replace the carpet) changed them round and as if by magic the seats fit perfectly in the car. the brackets that the seat bolt to are offset, hope this solves your problem
Logged
Private Message Reply: 5 - 6
Casper
June 19, 2017, 12:38pm Report to Moderator


Posts: 713
Posts Per Day: 0.24
Seat Fitting

Problems can often be found with seats that have been incorrectly refitted after being removed.  There are some minor variations in detail over the models and period of production but I believe the following should apply to all variations.
Components and terminology:
Seat runners - fitted to the floor, have holes for the adjuster to register in.

Subframe - runs on runners, includes adjuster lever on one side only.  Has two brackets on the front, each with two holes arranged one ABOVE the other.  On one side the bracket is square and straight, and on the other side the holes are set forward, so the bracket is shaped like a B.

Seat frame - on which seat is built.  Brackets at the front have two holes arranged one BEHIND the other.

Fitting:
Seat runners should be fitted with holes to the rear,  fixed with 5/16" UNF bolts, and with 1/2" spacers (thick washers) under each bolt.  Captive nut on turret at the rear is FQ3406 (should be available from the usual suspects).

The sub-frames are handed: you should have a pair.  They should be fitted so that the adjuster lever and catch is nearest the transmission tunnel.  This adjuster should mate with the holes in the seat runner (but won't if the seat runner has been fitted back to front).  This ensures that the holes on the bracket on the door side are a smidgen further forward than the transmission tunnel side, i.e. the B shaped bracket is nearest the door.

Choose between the high and the low hole on the seat sub-frame.  This adjusts rake and/or height (with blocks).  Use the foremost hole on the seat frame bracket for the door side (ie the side where the sub-frame holes are further forward) and the rearmost hole on the seat frame bracket on the tunnel side.  This means that the seat sits square on the sub-frame.  The fact that the pivot point is slightly angled, means that when the seat is tipped forward, the top moves inwards and does not hit the A post/windscreen surround.


Herald Anorak
Logged
Private Message Reply: 6 - 6
1 Pages 1 Recommend Thread
Print

Triumph Torque    Cars    Herald/Vitesse  ›  Vitesse seats (original ones)

Thread Rating
There is currently no rating for this thread
 


Powered by E-Blah Forum Software 10.3.5 © 2001-2008

Latest Blogs-
Steve Weblin

16th December 2017 07:30am gmt
Loxhams - Triumph Car Dealers 54
Rob Pearce

15th December 2017 10:31pm gmt
They Think The Welding's All Over...
more blogs...
Next Group Meetings-
North London & Herts Monday 18th December 20:00
Glasgow Tuesday 19th December 20:00
Shropshire Wednesday 20th December 19:00
West Midlands - 2nd meeting Wednesday 20th December 20:00
Southern Area 2nd meeting Thursday 21st December 20:00
more local groups...
Upcoming Events-
more events...
For Sale-
Spitfire MKIV cylinder head, refurbed not used. Casting 312240, Stamp number 218142. Unleaded inserts, seats triple cut, new valves, guides and springs. Skimmed 0.040 inch. £300. Mob. 07764 860234 email: steve-karen.dee@ hotmail.co.uk
Pair of Stromberg CD 175 carburettors, linkage and mounting nuts. Removed from an American-spec TR6. Looking for £35. Based in Peterborough. Matt George on the forum or phone 07921 853482.
project colander aka 1973 1500tc dolomite - needs lots of welding but is largely complete though partly dismantled . contact dinger on the forum
more adverts...
CLUB TRIUMPH the Club for all Triumphs
© Club Triumph Ltd MCMXCVI - MMXV